Northern Truck Equipment Corp.
HomeCompany HistoryServicesProductsNew InventoryUsed InventoryWhat's NewSpecialsLocationsJob OpeningsContact Us
Series 20 Carrier

 

chevroncarrier-20.jpg

 

 
 

Standard Equipment:
Aluminum Or Steel Body:
  • Aluminum Body:
    • High tensile double-box 4 inch extruded smooth floor system
    • Heavy duty extruded sill with integral full length graphite-impregnated wear strips top and bottom
    • Front left and right chain trays
    • Extruded double-box sides
    • Rear sill reinforcements
    • 6 chain locks (2 car)
    • 10 chain locks (4 car)
  • Steel Body:
    • 3/16 smooth floor
    • Front left and right chain trays
    • 4 x 2 structural tube crossmembers
    • Raised steel sides
    • 6 chain locks (2 car)
    • 10 chain locks (4 car)
    • In prime
  • Fully hydraulic hitch or wheel lift
  • Releaseable L-arms
  • Mechanical anti-tilt
  • Inboard tilt cylinders
  • 4 light tail light housing
  • Illuminated dual controls
  • 10 side body marker lights (5 per side)
  • Body lock
  • Mudflaps
  • Federal standard 108 lighting
  • Tow light plug
  • Water resistant junction box for wire harness connection
  • Lubrication fittings on all pivot points
  • 8,000 lb. hydraulic winch with 3/8 x 50 ft. cable
  • Pilot operated holding valves on tilting and lifting functions
  • Backup alarm
  • Winch free wheel extension (2 car only) 
  • Cable tensioner
  • Cable roller guide
  • Four safety chains
Optional Equipment:
  • Removable side rails (steel only) 
  • Welded open rail sides (steel only)
  • Floor level sides with stake pockets (steel only) 
  • Trailer style rub rails
  • Additional chain locks
  • 3/16 or 1/4 deck plate
  • 5/4 apitong hardwood floor
  • 9,000 lb. low mount planetary winch
  • 12,000 lb. low mount planetary winch (not available on 4 car) 
  • 15,000 lb. low mount planetary winch (not available on 4 car)
  • 15,000 lb. upright planetary winch (not available on 4 car)
  • 20,000 lb. upright planetary winch (not available on 4 car) 
  • JXL cab protector 
  • Stationary cab protector
  • PTO
  • Direct mount pump
  • Retractable ladder
  • Aluminum toolbox (33L x 18H x 18D)
  • Aluminum toolbox (49L x 18H x 18D)
  • Aluminum toolbox (65L x 18H x 18D)
  • Factory installation
  • Factory steel body paint
  • Pivoting L-arms
  • AutoGrip II wheel lift
  • 102 inch wide body
  • Galvanized subframe
  • Air free spool winch
  • Wired remote control
  • Radio remote control

Note: Some option selections may not be compatible in certain configurations.

Accessories:
  • Bar light
  • Work lights
  • Switch panel
  • LED lights
  • Magnetic tow lights
  • J-hook chains
  • Front hook-up chain
  • Trailer ball plate
  • Pintle hitch attachment

Chassis Recommendations:

  • Minimum GVWR - 23,000 lbs.
  • Maximum GVWR - 33,000 lbs. 
  • Accessible PTO opening
  • Maximum frame height - 42 inches
  • Minimum frame height - 38 inches

 

Back



Northern Truck Equipment Corp

 
 
 

Northern Truck Equipment Corp

 
 
 

Northern Truck Equipment Corp

 
 
 

Watertown, SD | Sioux Falls, SD | Rapid City, SD |  Fargo, ND | Sitemap