High Compaction Rear Loader

Compaction up to 1,300 lbs per yard Hopper size of 3.64 cubic yards Patented Dual Track System Offset upper track operates at softer angle, reducing friction. Less friction means more force is directed into the load. PowerTrak can use smaller cylinders for packing because of less friction. Smaller cylinders generate much faster cycle times. Smaller cylinders also reduce weight in the tailgate. Less friction reduces wear in the tailgate shoes and tracks, reducing maintenance costs. Reload in 7 to 9 seconds. Complete cycle in 21-23 seconds. More Payload Foward In The Body High angle mount of ejector cylinder allows panel to retract farther in the body, allowing more payload forward for bigger payloads and better weight distribution. Packing forces move upward in the body, saving wear on floor and tracks. Ejector panel does not contract tailgate. Raised Ejector Track System Similar to the Heil front loader design, raised tracks provide a tight fit for the ejector assembly, with less chance for trash to buildup behind ejector panel. Aluminum/bronze cast alloy shoes. Ejector shoes are easily replaced without removing the ejector panel. Shoes are reversible for double the life of ordinary shoes. Easy To Service Oversized cast alloy tailgate shoes provide long wear. Easily accessible through panel in rear bolster. Interlaced Subframe Heil's interlaced subframe is made from formed channels for extra strength. Fully welded for superior resistance to corrosion and cracking. Flat floor made from abrasion resistant steel for longer wear. No trough to clean out from trash buildup. Available in 20, 25, 27, & 32 cubic yard body capacity